NTS120-C

  • •Corrects the pH of your water supply

  • •Reduces corrosion of pipes & seals

  • •Max flow 150 Lpm, 25mm connection

Model No: NTS120-C

WHERE TO BUY

Acidic water can cause corrosion of pipe-work and seals in the water line, causing costly damage. When water drops below 7 pH it becomes acidic (depending how low the pH drops) and may begin dissolving copper from your pipes. This reaction results to the green and blue stain on your tap fittings, in your sink, bath and shower recesses. These units effectively utilise a calcium carbonate media to lift the pH, which slowly dissolves into the water protecting the plumbing system from corrosion.

Got blue-green stain on your sinks and tap?
When water drops below 7 pH it becomes acidic (depen ding how low the pH drops) and may begin dissolving copper from your pipes. This reaction results to the green and blue stain on your tap fittings, in your sink, bath and shower recesses. The Puretec NTS120-C is designed to correct the pH of your water. These units effectively utilise a calcium carbon ate media to lift the pH, which slowly dissolves into the water.

Specifications

Ordering Code
NTS120-C
Service Flow
100 Lpm
Maximum Flow Rate
150 Lpm
Inlet/Outlet Connection
1” Male Inlet/Outlet
Min/Max Pressure
138 - 862* kPa
Operating Temperature
0 - 43°C (protect from freezing)
Valve
In/out head
Warranty
1 year^
*If pressure exceeds max pressure, an approved pressure limiting device needs to be fitted. If water hammer is present, fit a hammer arrestor close to the source of the hammer. Note: Check local plumbing regulations as a specific kPa limit for the pressure limiting valve may be required (in particular, The Australian & New Zealand Plumbing Standards. Ref. AS/NZS 3500.1:2021, Clause 3.3.4). ^1 year warranty is 1 year parts and labour. Excludes consumables. Use only genuine Puretec replacements.

Features & Benefits

  • •Neutralise potentially corrosive water with a low pH.
  • •Utilises calcium carbonate media to lift the pH.
  • •Slow reacting for controlled pH correctors.
  • •Media fill port for easy maintenance.
  • •1inch connections means minimum pressure loss.
  • •Upflow configuration for reliable performance.
  • •No power required.

Download

For Specifiers

Do you still have questions about this product?

If you have any more questions, our team is very happy to assist. Please call 1300 140 140

Here some more helpful information: