SOL45-E3 Softener

  • Commercial water softner - smart valve

  • Reduces calcium & minerals from hard water

  • 28,000L capacity, 45 LPM

Model No: SOL45-E3

WHERE TO BUY

The Puretec SOL45-E3 softens water by reducing hardness ions, calcium and magnesium.

Hard water is water that contains dissolved minerals such as limestone, lead, iron, sulphur, calcium and magnesium. If these minerals are not removed from your water, they will cause scaling, eventually blocking plumbing and shortening the life of appliances. These elements are not always easily detected, but numerous negative effects can be unpleasant and costly.

The Puretec SOL45-E3 achieves long life of the filter bed through regeneration using brine solution which can be operated through timer or volume based control valves.

Specifications

Ordering Code
SOL45-E3
Valve
Volumetric E3-matic
Flow Rate
45 Lpm
Capacity
28,000 litres
Connection
1" Male BSPT, _" Drain
Min/Max Pressure
138 - 862 kPa*
Operating Temperature
5 - 40¡C (41 - 104¡F)
Power Supply
230V AC / 50 Hz
Warranty
1 year^
Replacement Media Kits
RMK-SOL45
Accessories
WTV5090 - Micro switch for automation of external equipment.
WTV5000 - Bypass assembly for testing, and maintenance.
PTE30 - Hardness test kit.
WTV5050 - Blending valve for partial hardness removal
SS5000 - SoftenerSafe Media, 5 litres
Note: Capacities are based on a hardness of 0.5ppm. The flow rate while the filter backwashes, needs to be equal to the stated service flow to maintain proper backwash functionality, which is critical for optimum performance of filtration systems.
Chlorine (free Chlorine) tolerance is 1ppm - high chlorine levels permanently damage the softening resin & is not covered under warranty. If chlorine exceeds this limit, we recommend a carbon pre-filter such as the WH2 or CFS Series. Please refer to Puretec for a specific recommendation.  In any case, a carbon pre-filter is recommended to protect against chlorine spikes & prolong the resin life.  
^1 year replacement parts and labour. *If the pressure exceeds 500kPa an approved pressure limiting device needs to be fitted.

Download

For Specifiers

Spare Parts

Do you still have questions about this product?

If you have any more questions, our team is very happy to assist. Please call 1300 140 140

Here some more helpful information: